SAFETY CONNECT SYSTEM > DIAGNOSIS SYSTEM |
| DESCRIPTION |
The DCM (Telematics Transceiver) controls the vehicle Safety Connect system functions. Safety Connect system data and Diagnostic Trouble Codes (DTCs) can be read through the vehicle Data Link Connector 3 (DLC3). In some cases, a malfunction may be occurring in the Safety Connect system. When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs.
| CHECK DLC3 |
Check the DLC3 (Click here).
| INSPECT AUXILIARY BATTERY VOLTAGE |
Measure the auxiliary battery voltage with the power switch off.
| CHECK INDICATOR |
When a malfunction is detected in the Safety Connect system, the manual (SOS) switch red indicator on the manual (SOS) switch illuminates to inform the driver of the malfunction (Click here).