Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF HOUSING

SLIDING ROOF HOUSING > REASSEMBLY

for Preparation Click here



1. INSTALL SLIDING ROOF WEATHERSTRIP


    B230183
  1. Engage the 12 clips and install a new sliding roof weatherstrip.



2. INSTALL REAR SLIDING ROOF WEATHERSTRIP


    B230182E01
  1. Align the matchmarks on the new rear sliding roof weatherstrip and rear sliding roof rail assembly.
    Text in Illustration 
    *1
    Matchmark



3. INSTALL FRONT MOON ROOF MOULDING


    B230181E01
  1. Install a new front moon roof moulding as shown in the illustration.
    Standard 
    Area
    Measurement
    a
    1.3 mm (0.00512 in.) or less



4. INSTALL REMOVABLE ROOF WEATHERSTRIP


    B230179E01
  1. Install a new removable roof weatherstrip as shown in the illustration.
    Standard 
    Area
    Measurement
    a
    2.3 mm (0.0906 in.) or less

    HINT:
    Use the same procedure for the RH side and LH side.



5. INSTALL REAR MOON ROOF MOULDING


    B229324E01
  1. Install a new rear moon roof moulding as shown in the illustration.



6. INSTALL SLIDING ROOF GLASS SEAL


    B229322
  1. Install a new sliding roof glass seal as shown in the illustration.