Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM

AIR CONDITIONING SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK USING TECHSTREAM
  1. Connect the Techstream to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the Techstream on.

  4. Enter the following menus: Body Electrical / Air Conditioner / Trouble Codes.

  5. Check for DTCs.


DTC CLEAR USING TECHSTREAM
  1. Connect the Techstream to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the Techstream on.

  4. Enter the following menus: Body Electrical / Air Conditioner / Trouble Codes.

  5. Clear the DTCs by pressing the YES button on the Techstream display.