ENGINE IMMOBILISER SYSTEM > DTC CHECK / CLEAR |
| CHECK FOR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC |
Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
Check the details of the DTC(s) (Click here).
| CHECK FOR POWER MANAGEMENT CONTROL ECU (HV CPU) DTC |
Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Powertrain / HV Control / Trouble Codes.
Check the details of the DTC(s).
(Click here for engine immobiliser system)
(Click here for hybrid vehicle control system)
| CLEAR CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) DTC |
Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Smart Key / Trouble Codes.
Clear the DTCs.
| CLEAR POWER MANAGEMENT CONTROL ECU (HV CPU) DTC |
Connect the Techstream to the DLC3.
Turn the power switch on (IG).
Turn the Techstream on.
Enter the following menus: Powertrain / HV Control / Trouble Codes.
Clear the DTCs.