Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REMOVAL

for Preparation Click here



1. REMOVE AIR CONDITIONING UNIT ASSEMBLY

HINT:
Refer to the procedure for Remove Air Conditioning Unit Assembly (Click here).



2. REMOVE BLOWER ASSEMBLY
  1. Remove the screw and disconnect the quick heater connector.

  1. Disconnect the connector and disengage each clamp.



  1. Disengage the 3 screws and guide, and remove the blower assembly.


    E189131E01


    Text in Illustration 
    *1
    Quick Heater Connector
    -
    -