DTC B1635/24 Rear Airbag Sensor LH Circuit Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1635/24 |
|
|

| 1.CHECK REAR AIRBAG SENSOR LH |
![]() |
Turn the power switch off.
Disconnect the cable from the negative (-) auxiliary battery terminal.
Interchange the rear airbag sensor RH with LH and connect the connectors to them.
Connect the cable to the negative (-) auxiliary battery terminal.
Turn the power switch on (IG), and wait for at least 60 seconds.
Clear the DTCs stored in the memory (Click here).
Turn the power switch off.
Turn the power switch on (IG), and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTCs B1630/23 and B1635/24 are not output. | A |
| DTC B1630/23 is output. | B |
| DTC B1635/24 is output. | C |
| *1 | Rear Airbag Sensor RH |
| *2 | Side Airbag Sensor LH |
|
| ||||
|
| ||||
| A | ||
| ||