Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH

WIPER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    E189320
  1. Engage the claw and install the windshield wiper switch assembly as shown in the illustration.

  1. Connect the 2 connectors.



2. INSTALL UPPER STEERING COLUMN COVER


    E190083
  1. Engage the claw and 2 pins to install the upper steering column cover.



3. INSTALL LOWER STEERING COLUMN COVER

NOTICE:
If the lower steering column cover is installed in the incorrect order, it will not be possible to assemble the lower steering column cover.



    E190126
  1. Engage the 2 claws to install the lower steering column cover.



    E190078
  1. Engage the 4 claws.



    E190082
  1. Engage the claw.

    HINT:
    Press the area around the claw to engage it.