Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER ACTUATOR

HEADLIGHT CLEANER ACTUATOR > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH


    E239914E01
  1. Pushing the tab and engage the 2 claws to install the headlight washer actuator sub-assembly LH.
    Text in Illustration 
    *1
    Tab



    E239912E01
  1. Push up the No. 1 headlight cleaner clamp.
    Text in Illustration 
    *1
    No. 1 Headlight Cleaner Clamp



    E239910E01
  1. Install the No. 3 headlight cleaner clamp.
    Text in Illustration 
    *1
    No. 3 Headlight Cleaner Clamp
    *2
    Headlight Cleaner Hose

  1. Connect the headlight cleaner hose.



2. INSTALL HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



3. INSTALL HEADLIGHT CLEANER WASHER NOZZLE COVER


    E239908
  1. Engage the 2 claws to install the headlight cleaner washer nozzle cover.

    HINT:
    Use the same procedure for the RH side and LH side.



4. INSTALL FRONT BUMPER ASSEMBLY
(Click here)