Home › Vehicle Interior › SEAT BELT › CHILD RESTRAINT SEAT ANCHOR BRACKET

CHILD RESTRAINT SEAT ANCHOR BRACKET > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT CUSHION ASSEMBLY


    B229992E02
  1. Disengage the 2 front hooks of the seat cushion from the vehicle body as shown in the illustration.
    Text in Illustration 
    *1
    Hook
    *2
    Guide
    *a
    100 mm (3.94 in.) or less

    NOTICE:
    Follow the instructions below carefully as the cushion frame deforms easily.


    1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.

    2. Repeat the above procedure for the other hook.

  1. Disengage the 2 guides of the seat cushion from the seatback.

  1. Remove the rear seat cushion assembly.



2. REMOVE REAR SEAT HEADREST ASSEMBLY LH (for LH Side)
  1. Remove the rear seat headrest assembly LH.



3. REMOVE REAR SEAT HEADREST ASSEMBLY RH (for RH Side)
  1. Remove the rear seat headrest assembly RH.



4. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY (for RH Side)
  1. Remove the rear seat center headrest assembly.



5. REMOVE REAR SEATBACK ASSEMBLY LH (for LH Side)
  1. Fold the rear seatback assembly LH forward.



    B233386E01
  1. Disengage the fastener.
    Text in Illustration 
    *1
    Fastener



    B229998
  1. Remove the 2 bolts and rear seatback assembly LH.



6. DISCONNECT REAR CENTER SEAT BELT ASSEMBLY (for RH Side)


    B221512
  1. Remove the bolt and disconnect the anchor part of the rear center seat belt assembly.



7. REMOVE REAR SEATBACK ASSEMBLY RH (for RH Side)
  1. Fold the rear seatback assembly RH forward.



    B233147E01
  1. Disengage the fastener.
    Text in Illustration 
    *1
    Fastener



    B230017
  1. Remove the 2 bolts and rear seatback assembly RH.



8. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY


    B221579
  1. Remove the 2 bolts and child restraint seat anchor bracket sub-assembly.