Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE HOOD COURTESY SWITCH

ENGINE HOOD COURTESY SWITCH > INSPECTION

for Preparation Click here



1. INSPECT ENGINE HOOD COURTESY SWITCH


    B229081E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Locked
    Below 1 Ω
    1 - 2
    Unlocked
    10 kΩ or higher

    Text in illustration 
    *1
    Component without harness connected
    (Hood Lock Assembly (Engine Hood Courtesy Switch))
    *2
    Unlock
    *3
    Lock
    If the result is not as specified, replace the hood lock assembly.