Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM

AIR CONDITIONING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.


Air Conditioner 
Display (Item)
Default
Content
Setting
Set Temperature Shift
Normal
Function to control the shifted temperature against the displayed temperature.
-2C, -1C, Normal, +1C, +2C
Compressor Mode
Automatic
Function to automatically turn the A/C on by pressing the AUTO button when blower is on and the A/C is off.
Automatic or Manual
Air inlet Mode*2
Automatic
In case of turning the A/C ON to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode
Automatic or Manual
Foot/DEF Auto Mode
ON
Function to automatically turn the airflow from FOOT/DEF on when AUTO mode is on.
ON or OFF
Foot/DEF Automatic Blow Up Function
ON
Function to automatically increase the blower level when the defroster is on.
ON or OFF
Ambient Temperature Shift
Normal
Function to control the shifted ambient temperature in relation to the displayed ambient temperature.
-3C, -2C, -1C, Normal, +1C, +2C, +3C
ECO MODE Cancel
OFF
Function to cancel the ECO drive mode when item is on.
OFF or ON
Noise and Vibration Reduction
OFF
Function to change speed of the compressor when item is on.
OFF or ON
Start Pre A/C*1
Long1
Function to set the activation operation method for the remote air conditioning system using the key (electrical transmitter).
1 tim ON, 2 tim ON, Long1 or Long2
Stop Pre A/C*1
2 tim ON
Function to set the stop operation method for the remote air conditioning system using the key (electrical transmitter).
1 tim ON, 2 tim ON, Long1 or Long2
  1. *1: w/ Remote Air Conditioning System
  2. *2: for Korea and Mexico

CUSTOMIZING FUNCTION WITH MULTI-DISPLAY

HINT:
The items in the table below can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current setting before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the multi-display (w/ Navigation System (for Navigation Receiver Type)

    1. Turn the power switch on (IG).

    2. Enter the following menus: SETUP / Vehicle / Vehicle Settings / Climate Settings.

    3. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Auto A/C Mode
      On
      Function to automatically turn the A/C on by pressing the AUTO button when blower is on and the A/C is off
      On or Off
      Air conditioning amplifier assembly
      Efficient Ventilation Mode*1
      On
      In case of turning the A/C ON to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode
      On or Off
      Air conditioning amplifier assembly

      1. *1: for Korea