BACK DOOR LOCK > INSPECTION |
| 1. INSPECT BACK DOOR LOCK ASSEMBLY |
Check the operation of the door lock motor.
![]() |
Move the door lock to the lock position.
Apply battery voltage to the door lock motor and check the operation of the door lock motor.
| Connection | Result |
| Battery positive (+) → 4 (ACT+) Battery negative (-) → 3 (ACT-) | Unlocks |
Check the operation of the door courtesy switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 (E) - 2 (+) | Locked | 10 kΩ or higher |
| 1 (E) - 2 (+) | Unlocked | Below 1 Ω |
| *1 | Component without harness connected (Back Door Lock Assembly) |
| *2 | Lock |
| *3 | Unlock |