Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE (for Rear Side)

WASHER NOZZLE (for Rear Side) > REMOVAL

for Preparation Click here



1. REMOVE UPPER BACK DOOR TRIM PANEL ASSEMBLY


    B227895
  1. Using a moulding remover, disengage the 4 clips and 4 claws, and remove the upper back door trim panel assembly.



2. REMOVE REAR WASHER NOZZLE


    E189294
  1. Disengage the 2 claws.



    E189293
  1. Disconnect the washer hose and remove the rear washer nozzle.