Home › Vehicle Exterior › VEHICLE PROXIMITY NOTIFICATION SYSTEM › VEHICLE APPROACHING SPEAKER

VEHICLE APPROACHING SPEAKER > INSPECTION

for Preparation Click here



1. INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY


    E220216E15
  1. Measure the resistance according to the value(s) in the tables below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (+) - 2 (-)
    Always
    6 to 10 Ω

    Text in Illustration 
    *a
    Component without harness connected
    (Vehicle Approaching Speaker Assembly)

  1. HINT:
    1. Make sure that there are no problems such as looseness or play with the installation of the vehicle approaching speaker.
    2. Make sure that there are no abnormalities with the vehicle approaching speaker such as the presence of foreign material or tears in the paper of the speaker cone.
    If the result is not as specified, replace the vehicle approaching speaker assembly.