Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING RESET SWITCH

TIRE PRESSURE WARNING RESET SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL TIRE PRESSURE WARNING RESET SWITCH


    C207301
  1. Engage the 2 claws to install the tire pressure warning reset switch to the No. 1 instrument panel under cover sub-assembly.



2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. Connect each connector.

  1. Engage the guide and claw.

  1. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <D>.



3. INSPECT TIRE PRESSURE WARNING SYSTEM
  1. Inspect the tire pressure warning system (Click here).