BLOWER UNIT > DISASSEMBLY |
| 1. REMOVE AIR INLET CONTROL SERVO MOTOR SUB-ASSEMBLY |
![]() |
Remove the 2 screws and air inlet control servo motor sub-assembly.
| 2. REMOVE AIR FILTER CASE |
![]() |
Disengage the claw and guide, and remove the air filter case as shown in the illustration.
| 3. REMOVE CLEAN AIR FILTER |
![]() |
Remove the clean air filter as shown in the illustration.
| 4. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY (w/o Solar Ventilation System) |
![]() |
Remove the 3 screws and front blower motor sub-assembly.
| 5. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY (w/ Solar Ventilation System) |
![]() |
Remove the 3 screws and front blower motor sub-assembly.