POWER WINDOW MASTER SWITCH > INSTALLATION |
| 1. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY |
![]() |
Install the multiplex network master switch assembly with the 3 screws.
| 2. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL |
![]() |
Connect the connector.
Engage the 7 claws and 3 guides, and install the power window regulator master switch assembly with front door armrest base panel.
| 3. INSTALL ASSIST GRIP COVER |
![]() |
Engage the 6 claws, 2 clips and 3 guides, and install the assist grip cover.