POWER WINDOW MASTER SWITCH > REMOVAL |
| 1. REMOVE ASSIST GRIP COVER |
![]() |
Using a moulding remover, disengage the 6 claws, 2 clips and 3 guides, and remove the assist grip cover.
| 2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL |
![]() |
Disengage the 7 claws and 3 guides.
Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.
| 3. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY |
![]() |
Remove the 3 screws and the multiplex network master switch assembly.