Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH

FRONT PASSENGER SIDE POWER WINDOW SWITCH > REMOVAL

for Preparation Click here



1. REMOVE ASSIST GRIP COVER

HINT:
Use the same procedure for the RH side and LH side .



2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B232008
  1. Disengage the 7 claws and 3 guides.

  1. Disconnect each connector and remove the power window regulator switch assembly with front door armrest base panel.



3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B229115
  1. Disengage the 2 claws and remove the power window regulator switch assembly.