Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER

DOOR CONTROL TRANSMITTER > REMOVAL

for Preparation Click here



1. REMOVE TRANSMITTER BATTERY

NOTICE:
Take extra care when handling these precision electronic components.



    B107849
  1. Push the release hook knob and extract the mechanical key.



    B213777
  1. Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

    HINT:
    Tape the screwdriver tip before use.



    B231683
  1. Insert a precision screwdriver into the gap and gently remove the battery (lithium battery: CR1632).

    NOTICE:
    1. Do not push the terminals with your finger.
    2. Do not forcibly pry up the battery. The terminals may be damaged.
    3. Do not touch the battery with wet hands. Water may cause rust.
    4. Do not touch or move any components inside the transmitter. It may interfere with proper operation.

    HINT:
    Tape the screwdriver tip before use.