POWER STEERING ECU > REMOVAL |
| 1. REMOVE UPPER INSTRUMENT PANEL |
| 2. REMOVE POWER STEERING ECU ASSEMBLY (for Brush Type Motor) |
![]() |
Disengage the wire harness clamp from the power steering ECU assembly.
Disconnect the 4 connectors from the power steering ECU assembly.
![]() |
Remove the bolt, 2 nuts, and the power steering ECU assembly.
| 3. REMOVE POWER STEERING ECU ASSEMBLY (for Brushless Type Motor) |
![]() |
Disengage the wire harness clamp from the power steering ECU assembly.
| *1 | Lock of the Lock Lever |
| *2 | Lock Lever |
Disconnect the connector from the power steering ECU assembly.
![]() |
Disconnect the 3 connectors from the power steering ECU assembly.
![]() |
Remove the bolt, 2 nuts, and the power steering ECU assembly.