Home › Engine / Hybrid System › 2ZR-FXE ENGINE CONTROL › MASS AIR FLOW METER

MASS AIR FLOW METER > INSTALLATION

for Preparation Click here



1. INSTALL MASS AIR FLOW METER

HINT:
Perform "Inspection After Repair" after replacing the mass air flow meter (Click here).



    A216912
  1. Install the mass air flow meter with the 2 screws.

    NOTICE:
    Make sure that the O-ring is not cracked or does not jump out of position during installation.

  1. Connect the mass air flow meter connector.



2. INSTALL NO. 2 CYLINDER HEAD COVER


    A213020
  1. Engage the 3 clips to install the cover.

    NOTICE:
    1. Be sure to engage the clips securely.
    2. Do not apply excessive force or hit the cover to engage the clips. This may cause the cover to break.



3. PERFORM INITIALIZATION
  1. Perform "Inspection After Repair" after replacing the mass air flow meter (Click here).