Home › Engine / Hybrid System › 2ZR-FXE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR

ENGINE COOLANT TEMPERATURE SENSOR > REMOVAL

for Preparation Click here



1. REMOVE EGR WITH COOLER PIPE SUB-ASSEMBLY
  1. Remove the EGR with cooler pipe sub-assembly (Click here).



2. REMOVE INVERTER RESERVE TANK ASSEMBLY


    A212304
  1. Remove the 2 bolts and separate the inverter reserve tank assembly.



3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR
  1. Disconnect the engine coolant temperature sensor connector.



    A216695
  1. Remove the engine coolant temperature sensor.