REAR BUMPER > REMOVAL |
| 1. REMOVE REAR BUMPER ASSEMBLY |
![]() |
Put protective tape around the rear bumper assembly.
| *1 | Protective Tape |
![]() |
Remove the 2 screws and 2 rear bumper upper stoppers.
![]() |
Using a clip remover, remove the 9 clips.
Remove the nut.
![]() |
Remove the screw.
Disengage the claw.
![]() |
Disengage the 5 claws.
![]() |
Disengage the 4 claws and remove the rear bumper assembly as shown in the illustration.