Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR SIDE SPOILER SUB-ASSEMBLY LH


    B228484
  1. Remove the 3 screws.

  1. Disengage the claw and clip, and remove the rear side spoiler sub-assembly LH.



2. REMOVE REAR SIDE SPOILER SUB-ASSEMBLY RH


    B228483
  1. Remove the 3 screws.

  1. Disengage the claw and clip, and remove the rear side spoiler sub-assembly RH.



3. REMOVE REAR NO. 1 SPOILER


    B228485
  1. Remove the 5 clips.

  1. Disengage the 4 guides and remove the rear No. 1 spoiler.



4. REMOVE REAR BUMPER SIDE RETAINER LH


    B228486
  1. Remove the 3 screws.

  1. Disengage the 4 claws and guide, and remove the rear bumper side retainer LH.



5. REMOVE REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure for the RH side and LH side.



6. REMOVE REAR BUMPER ENERGY ABSORBER


    B228488
  1. Disengage the 2 guides and remove the rear bumper energy absorber.



7. REMOVE NO. 1 REAR BUMPER REINFORCEMENT


    B228489
  1. Remove the 4 nuts and No. 1 rear bumper reinforcement.