Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 1 REAR BUMPER REINFORCEMENT


    B228489
  1. Install the No. 1 rear bumper reinforcement with the 4 nuts.

    Torque:
    29 N*m{ 296 kgf*cm , 21 ft.*lbf }



2. INSTALL REAR BUMPER ENERGY ABSORBER


    B228488
  1. Engage the 2 guides to install the rear bumper energy absorber.



3. INSTALL REAR BUMPER SIDE RETAINER LH


    B228486
  1. Engage the guide and 4 claws.

  1. Install the rear bumper side retainer LH with the 3 screws.



4. INSTALL REAR BUMPER SIDE RETAINER RH

HINT:
Use the same procedure for the RH side and LH side.



5. INSTALL REAR NO. 1 SPOILER


    B228485
  1. Engage the 4 guides.

  1. Install the rear No. 1 spoiler with the 5 clips.



6. INSTALL REAR SIDE SPOILER SUB-ASSEMBLY LH


    B228484
  1. Engage the claw and clip.

  1. Install the rear side spoiler sub-assembly LH with the 3 screws.



7. INSTALL REAR SIDE SPOILER SUB-ASSEMBLY RH


    B228483
  1. Engage the claw and clip.

  1. Install the rear side spoiler sub-assembly RH with the 3 screws.