Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING

ROCKER PANEL MOULDING > INSTALLATION

for Preparation Click here



1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY
  1. Install 9 new clips (rocker panel moulding clip) to the body rocker panel moulding assembly.



    B229353
  1. Engage the 9 clips to install the body rocker panel moulding assembly.



    B229352E01
  1. Install the 4 No. 2 side mudguard retainers and 4 side mudguard retainers.
    Text in Illustration 
    *1
    No. 2 Side Mudguard Retainer
    *2
    Side Mudguard Retainer



    B229351
  1. Install the screw.



    B229350
  1. Install the screw.



    B229349
  1. Install the screw.



    B229348
  1. Install the 2 screws.



2. INSTALL REAR WHEEL HOUSE FRONT PLATE


    B229360
  1. Install the rear wheel house front plate with the new clip.

  1. Install the screw.