ROCKER PANEL MOULDING > REMOVAL |
| 1. REMOVE REAR WHEEL HOUSE FRONT PLATE |
![]() |
Remove the screw.
Remove the clip and rear wheel house front plate.
| 2. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY |
![]() |
Put protective tape around the body rocker panel moulding assembly.
| *1 | Protective Tape |
![]() |
Remove the 2 screws.
![]() |
Remove the screw.
![]() |
Remove the screw.
![]() |
Remove the screw.
![]() |
Remove the 4 side mudguard retainers and 4 No. 2 side mudguard retainers.
| *1 | No. 2 Side Mudguard Retainer |
| *2 | Side Mudguard Retainer |
![]() |
Disengage the 9 clips to remove the body rocker panel moulding assembly.
Remove the 9 clips (rocker panel moulding clip).