Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH

DOOR CONTROL SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL DOOR CONTROL SWITCH ASSEMBLY


    B229278
  1. Engage the 2 claws to install the door control switch assembly.



2. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL
  1. Connect each connector.



    B232008
  1. Engage the 7 claws and 3 guides, and install the power window regulator switch assembly with front door armrest base panel.



3. INSTALL ASSIST GRIP COVER

HINT:
Use the same procedure for the RH side and LH side .