Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH

DOOR CONTROL SWITCH > REMOVAL

for Preparation Click here



1. REMOVE ASSIST GRIP COVER

HINT:
Use the same procedure for the RH side and LH side .



2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B232008
  1. Disengage the 7 claws and 3 guides.

  1. Disconnect each connector and remove the power window regulator switch assembly with front door armrest base panel.



3. REMOVE DOOR CONTROL SWITCH ASSEMBLY


    B229278
  1. Disengage the 2 claws and remove the door control switch assembly.