Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT BLOWER MOTOR

FRONT BLOWER MOTOR > INSTALLATION

for Preparation Click here



1. PRECAUTION (w/ Solar Ventilation System)

NOTICE:
Make sure to turn off the solar ventilation switch to prevent the blower motor from operating unexpectedly.



2. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY (w/o Solar Ventilation System)


    E189092
  1. Install the front blower motor sub-assembly with the 3 screws.

    NOTICE:
    Do not install the front blower motor sub-assembly if it has been damaged or impacted.

  1. Engage the clamp and connect the connector.

  1. Install the quick heater connector screw.



3. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY (w/ Solar Ventilation System)


    E189094
  1. Install the front blower motor sub-assembly with the 3 screws.

    NOTICE:
    Do not install the front blower motor sub-assembly if it has been damaged or impacted.

  1. Engage the clamp and connect the connector.

  1. Install the quick heater connector screw.



4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. Connect each connector.

  1. Engage the guide and 3 claws to install the No. 2 instrument panel under cover sub-assembly.