PERSONAL LIGHT > INSTALLATION |
| 1. INSTALL MAP LIGHT BULB |
Install the 2 map light bulbs to the 2 map light sockets.
![]() |
Turn the 2 map light bulbs and 2 map light sockets in the direction indicated by the arrows in the illustration and install them as a unit.
| 2. INSTALL MAP LIGHT ASSEMBLY (w/o Sliding Roof) |
Connect the connector.
![]() |
Engage the 2 guides and 4 clips, and install the map light assembly.
| 3. INSTALL MAP LIGHT ASSEMBLY (w/ Sliding Roof) |
Connect the connector.
![]() |
Engage the 2 guides and 4 clips, and install the map light assembly.
| 4. INSTALL ROOF TOP MOULDING (w/o Lane Keeping Assist System) |
![]() |
Engage the 3 claws and 2 clips to install the roof top moulding.
| 5. INSTALL ROOF TOP MOULDING (w/ Lane Keeping Assist System) |
![]() |
Engage the 6 claws to install the roof top moulding.