Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT

ROOM LIGHT > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY


    E189683E01
  1. Using a screwdriver wrapped with protective tape, disengage the 4 claws and remove the No. 1 room light lens.
    Text in Illustration 
    *1
    Protective Tape



    E189685E01
  1. Using a screwdriver wrapped with protective tape, disengage the 2 claws and 2 guides, and remove the 2 No. 1 room light covers.
    Text in Illustration 
    *1
    Protective Tape



    E189687E01
  1. Using a screwdriver wrapped with protective tape, disengage the 4 claws and disconnect the No. 1 room light assembly as shown in the illustration.
    Text in Illustration 
    *1
    Protective Tape



    E189689
  1. Using a screwdriver, disengage the 4 claws and disconnect the room light switch base from the No. 1 room light assembly.