Home › Vehicle Interior › LIGHTING (INT) › FOOTWELL LIGHT

FOOTWELL LIGHT > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Driver Side)


    E189700
  1. Engage the 2 claws and install the No. 1 interior illumination light assembly.



2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Driver Side)
  1. Connect each connector.

  1. Engage the guide and claw.

  1. Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <D>.



3. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Front Passenger Side)


    E189702
  1. Engage the 2 claws and install the No. 1 interior illumination light assembly.



4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Front Passenger Side)
  1. Connect each connector.

  1. Engage the guide and 3 claws to install the No. 2 instrument panel under cover sub-assembly.