Home › Vehicle Interior › LIGHTING (INT) › FOOTWELL LIGHT

FOOTWELL LIGHT > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Driver Side)


    B223658
  1. Remove the 2 screws <D>.

  1. Disengage the claw and guide.

  1. Disconnect each connector and remove the No. 1 instrument panel under cover sub-assembly.



2. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Driver Side)


    E189700
  1. Using a screwdriver, disengage the 2 claws and remove the No. 1 interior illumination light assembly.



3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Front Passenger Side)


    B231119
  1. Disengage the 3 claws and guide.

  1. Disconnect each connector and remove the No. 2 instrument panel under cover sub-assembly.



4. REMOVE NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (for Front Passenger Side)


    E189702
  1. Using a screwdriver, disengage the 2 claws and remove the No. 1 interior illumination light assembly.