Home › Vehicle Exterior › LIGHTING (EXT) › TURN SIGNAL FLASHER ASSEMBLY

TURN SIGNAL FLASHER ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL TURN SIGNAL FLASHER ASSEMBLY


    E189666
  1. Connect the connector.

  1. Engage the claw to install the turn signal flasher assembly.



2. INSTALL NO. 3 SIDE DEFROSTER NOZZLE DUCT


    E189204
  1. Install the No. 3 side defroster nozzle duct with the clip.



3. INSTALL UPPER INSTRUMENT PANEL ASSEMBLY

HINT:
Refer to the procedure from Install Upper Instrument Panel Assembly (Click here).