Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Navigation Receiver Type)

NAVIGATION SYSTEM (for Navigation Receiver Type) > Does not Play even after Bluetooth Audio Mode is Selected

for Preparation Click here


INSPECTION PROCEDURE

NOTICE:
After replacing the navigation ECU sub-assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM radio ID is necessary.

HINT:
Even if the portable player can play audio content, it may not be able to play via the in-vehicle device. This does not necessarily indicate a malfunction of the in-vehicle device.

1.CHECK OPERATION
  1. Check if the portable player operates normally.

    OK:
    The portable player operates normally.



NG
MALFUNCTION IN PORTABLE PLAYER
OK


2.CHECK AUDIO SETTINGS


    E225799E01
  1. Display the "Sound Settings" screen.

  1. Set volume, fader and balance to the initial values and check that sound is normal.

    OK:
    Audio system returns to normal.

    HINT:
    Sound quality adjustment measures vary according to the type of amplifier.

    Text in Illustration 
    *a
    Example



NG
REPLACE NAVIGATION ECU SUB-ASSEMBLY (Click here)
OK


3.CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL
  1. Check if the "Bluetooth" audio player plays normally on another "Bluetooth" audio compatible vehicle of the same model.

    OK:
    "Bluetooth" audio player plays normally.



NG
MALFUNCTION IN PORTABLE PLAYER
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)