Home › Audio / Visual / Telematics › AUDIO / VIDEO › AMPLIFIER ANTENNA

AMPLIFIER ANTENNA > REMOVAL

for Preparation Click here



1. REMOVE ROOF HEADLINING ASSEMBLY
(Click here)


2. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY


    E188483
  1. Remove the roof antenna pole sub-assembly as shown in the illustration.



3. REMOVE AMPLIFIER ANTENNA ASSEMBLY (for Roof)


    E188489
  1. Disconnect the connector.

  1. Remove the antenna nut and amplifier antenna assembly.



4. REMOVE NO. 5 ANTENNA CORD SUB-ASSEMBLY (for Quarter Panel)


    E237138
  1. Disconnect the connector.

  1. Remove the bolt.

  1. Disengage the 4 clamps and remove the No. 5 antenna cord sub-assembly.



5. REMOVE AMPLIFIER ANTENNA ASSEMBLY (for Quarter Panel)


    E240151
  1. Disconnect the connector.

  1. Remove the bolt.

  1. Disengage the guide and remove the amplifier antenna assembly.