Home › Audio / Visual / Telematics › CELLULAR COMMUNICATION › TELEPHONE AND GPS ANTENNA CORDS

TELEPHONE AND GPS ANTENNA CORDS > REMOVAL

for Preparation Click here



1. REMOVE ROOF HEADLINING ASSEMBLY

HINT:
Refer to the procedure up to Remove Roof Headlining Assembly (Click here).



2. REMOVE NO. 2 ROOF SILENCER PAD (w/o Sliding Roof)


  1. Remove the No. 2 roof silencer pad from the roof headlining assembly.


    B311294



3. REMOVE NO. 3 ROOF SILENCER PAD (w/o Sliding Roof)


  1. Remove the No. 3 roof silencer pad from the roof headlining assembly.


    B311295



4. REMOVE TELEPHONE AND GPS ANTENNA CORD SUB-ASSEMBLY


  1. Peel the strips of the tape used to secure the antenna cord only to the extent that allows removal of the antenna cord.


    E200203E01

  1. Remove the telephone and GPS antenna cord sub-assembly.