MICROPHONE (w/ Sliding Roof) > REMOVAL |
| 1. REMOVE ROOF TOP MOULDING |
![]() |
Using a moulding remover, disengage the 3 claws and 2 clips, and remove the roof top moulding.
| 2. REMOVE MAP LIGHT ASSEMBLY |
![]() |
Disengage the 4 clips and 2 guides as shown in the illustration.
Disconnect the connector and remove the map light assembly.
| 3. REMOVE TELEPHONE MICROPHONE ASSEMBLY |
![]() |
Remove the 8 screws and map light cover.
![]() |
Disconnect the connector.
Disengage the 2 claws and remove the telephone microphone assembly.