DCM(TELEMATICS TRANSCEIVER) > REMOVAL |
| 1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY |
| 2. REMOVE BACK-UP BATTERY WITH BRACKET |
![]() |
Disconnect the connector.
Remove the bolt.
Disengage the 2 guides and remove the back-up battery with bracket
| 3. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET |
![]() |
Disconnect the 3 connectors.
Remove the 3 bolts and DCM (telematics transceiver) with bracket.
| 4. REMOVE NO. 2 TELEPHONE BRACKET |
![]() |
Remove the 2 screws and No. 2 telephone bracket.
| 5. REMOVE NO. 3 TELEPHONE BRACKET |
![]() |
Remove the 2 screws and No. 3 telephone bracket.
| 6. REMOVE DCM (TELEMATICS TRANSCEIVER) |