Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for LH Side)

REAR SEAT INNER BELT ASSEMBLY (for LH Side) > INSTALLATION

for Preparation Click here



1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH


    B221498E01
  1. Install the rear seat inner with center belt assembly LH with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    Text in Illustration 
    *1
    Protruding Part

    NOTICE:
    Do not allow the anchor part of the rear seat inner with center belt assembly LH to overlap onto the protruding parts of the floor panel.



2. INSTALL REAR SEAT CUSHION ASSEMBLY


    B311726E01
  1. Engage the 2 guides of the seat cushion to the seatback.
    Text in Illustration 
    *1
    Guide
    *2
    Hook

  1. Engage the 2 front hooks of the seat cushion to the vehicle body.

    NOTICE:
    When installing the seat cushion, make sure that the seat belt buckle is not under the seat cushion.

    HINT:
    Confirm that the seat cushion is firmly installed.