Home › Audio / Visual / Telematics › CELLULAR COMMUNICATION › BACK-UP BATTERY

BACK-UP BATTERY > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 TELEPHONE BRACKET


2. INSTALL BACK-UP BATTERY


    E198170
  1. Install the back-up battery to the No. 1 telephone bracket as shown in the illustration.



3. INSTALL BACK-UP BATTERY WITH BRACKET


    E189846
  1. Engage the 2 guides.

  1. Install the back-up battery with bracket with the bolt.

  1. Connect the connector.



4. INSTALL RADIO RECEIVER WITH BRACKET (w/o Navigation System)
  1. Connect each connector.

  1. Engage the 4 claws as shown in the illustration.

  1. Install the radio and display receiver assembly with bracket with the 4 bolts.



5. INSTALL NAVIGATION RECEIVER WITH BRACKET (w/ Navigation System)


    E188508
  1. Engage the 4 claws and temporarily install the navigation receiver with bracket as shown in the illustration.

  1. Install the navigation receiver with bracket with the 4 bolts.



6. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
  1. Connect the connector.

  1. Engage the 3 claws to install the upper instrument panel finish panel sub-assembly.



7. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH
  1. Connect the connector.

  1. Engage the 14 claws to install the instrument cluster finish panel garnish.



8. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B223456
  1. Engage the 7 claws and 2 clips to install the lower center instrument cluster finish panel sub-assembly.



9. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    B223453
  1. Connect each connector.

  1. Engage the 6 claws to install the integration control and panel assembly.