SHIFT CONTROL ACTUATOR > REMOVAL |
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
| 2. REMOVE SHIFT CONTROL ACTUATOR ASSEMBLY |
![]() |
Disconnect the connector from the shift control actuator assembly.
![]() |
Using pliers or an equivalent tool, turn the shift control actuator bolt covers counterclockwise and remove the 3 shift control actuator bolts and shift control actuator assembly.
| *1 | Shift Control Actuator Bolt |
| *2 | Cover |
| *3 | Shift Control Actuator Assembly |
| *4 | Transaxle Assembly |
| 3. REMOVE SHIFT CONTROL ACTUATOR SEAL |
Using a screwdriver with the tip taped, remove the shift control actuator seal.