UPPER INSTRUMENT PANEL > DISASSEMBLY |
| 1. REMOVE NO. 3 HEATER TO REGISTER DUCT |
![]() |
Remove the 3 screws <C> and No. 3 heater to register duct.
| 2. REMOVE NO. 2 HEATER TO REGISTER DUCT |
![]() |
Remove the 3 screws <C> and No. 2 heater to register duct.
| 3. REMOVE NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) |
Disengage the 5 clamps.

Remove the 2 screws and navigation antenna assembly.
| 4. REMOVE AUTOMATIC LIGHT CONTROL SENSOR |
![]() |
Disconnect the connector.
Disengage the 2 claws and remove the automatic light control sensor.
| 5. REMOVE NO. 2 INSTRUMENT PANEL WIRE |
Disconnect the connector.
Disengage the 2 claws and each clamp, and remove the No. 2 instrument panel wire.

| 6. REMOVE NO. 5 INSTRUMENT PANEL WIRE |
![]() |
Disengage the 2 clamps and remove the No. 5 instrument panel wire.
| 7. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() |
Remove the 5 screws <C> and instrument cluster finish panel assembly.
| 8. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Remove the 3 screws <C> and center instrument panel register assembly.
| 9. REMOVE METER HOOD SPACER |
![]() |
Remove the 2 screws <C> and meter hood spacer.
| 10. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY |
![]() |
Remove the 2 screws and 2 clamps.
![]() |
Lean the instrument panel and disengage the 3 hooks as shown in the illustration.
![]() |
Disengage the 3 hooks to remove the front passenger airbag assembly from the instrument panel safety pad assembly as shown in the illustration.
| 11. REMOVE NO. 1 INSTRUMENT PANEL CUSHION |
![]() |
Remove the No. 1 instrument panel cushion.
| 12. REMOVE INSTRUMENT PANEL CUSHION |
![]() |
Remove the instrument panel cushion.
| 13. REMOVE NO. 2 INSTRUMENT PANEL CUSHION |
![]() |
Remove the No. 2 instrument panel cushion.
| 14. REMOVE NO. 4 INSTRUMENT PANEL CUSHION |
![]() |
Remove the No. 4 instrument panel cushion.
| 15. REMOVE NO. 5 INSTRUMENT PANEL CUSHION |
![]() |
Remove the No. 5 instrument panel cushion.