Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX

FRONT CONSOLE BOX > DISASSEMBLY

for Preparation Click here



1. REMOVE CONSOLE REAR END PANEL


    B279585
  1. Disengage the 10 claws to remove the console rear end panel.



2. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY


    B279586
  1. Using a screwdriver, pull out the box door hinge shafts.

    HINT:
    1. The illustration is for the LH side.
    2. Use the same procedure for the RH side and LH side.

  1. Remove the console compartment door subassembly.



3. REMOVE CONSOLE COMPARTMENT DOOR PAD SUB-ASSEMBLY


    B279587
  1. Disengage the 8 claws and remove the console compartment door pad sub-assembly.



4. REMOVE REAR CONSOLE COMPARTMENT DOOR BOX COVER


    B279588
  1. Pull the rear console compartment door box cover in the direction indicated by the arrow to disengage the claw and 5 guides, and remove the rear console compartment door box cover.



5. REMOVE NO. 2 CONSOLE COMPARTMENT DOOR INSERT


    B279590
  1. Pull the No. 2 console compartment door insert in the direction indicated by the arrow to disengage the 2 claws and 3 guides, and remove the No. 2 console compartment door insert.



6. REMOVE NO. 1 CONSOLE COMPARTMENT DOOR INSERT

HINT:
Use the same procedure as for the No. 2 console compartment door insert.



7. REMOVE NO. 2 BOX SIDE PANEL


    B279592E01
  1. Pull the No. 2 box side panel in the direction indicated by the arrow to disengage the 8 claws and guide, and remove the No. 2 box side panel as shown in the illustration.



8. REMOVE NO. 1 BOX SIDE PANEL

HINT:
Use the same procedure as for the No. 2 box side panel.



9. REMOVE FRONT CONSOLE BOX FILLER SUB-ASSEMBLY


    E236142
  1. Disengage the 4 claws and 2 guide, to remove the front console box filler sub-assembly.



10. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY


    E234568
  1. Disengage the 2 claws and remove the No. 1 stereo jack adapter assembly.



11. REMOVE CENTER POWER OUTLET SOCKET ASSEMBLY


    E236143E01
  1. Using a screwdriver, disengage the claw and remove the center power outlet socket assembly.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    Tape the screwdriver tip before use.



12. REMOVE CENTER POWER OUTLET SOCKET COVER


    E236145
  1. Disengage the 2 claws and remove the center power outlet socket cover.