FRONT CONSOLE BOX > REASSEMBLY |
| 1. INSTALL CENTER POWER OUTLET SOCKET COVER |
![]() |
Engage the 2 claws to install the center power outlet socket cover.
| 2. INSTALL CENTER POWER OUTLET SOCKET ASSEMBLY |
![]() |
Engage the claw to install the center power outlet socket assembly.
| 3. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY |
Engage the 2 claws to install the No. 1 stereo jack adapter assembly.
| 4. INSTALL FRONT CONSOLE BOX FILLER SUB-ASSEMBLY |
Engage the 2 guides and 4 claws, to install the front console box filler sub-assembly.
| 5. INSTALL NO. 2 BOX SIDE PANEL |
![]() |
Engage the 8 claws and guide to install the No. 2 box side panel as shown in the illustration.
| 6. INSTALL NO. 1 BOX SIDE PANEL |
| 7. INSTALL NO. 2 CONSOLE COMPARTMENT DOOR INSERT |
![]() |
Engage the 2 claws and 3 guides to install the No. 2 console compartment door insert as shown in the illustration.
| 8. INSTALL NO. 1 CONSOLE COMPARTMENT DOOR INSERT |
| 9. INSTALL REAR CONSOLE COMPARTMENT DOOR BOX COVER |
![]() |
Engage the claw and 5 guides to install the rear console compartment door box cover as shown in the illustration.
| 10. INSTALL CONSOLE COMPARTMENT DOOR PAD SUB-ASSEMBLY |
![]() |
Engage the 8 claws to install the console compartment door pad sub-assembly.
| 11. INSTALL CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY |
Temporarily install the console compartment door sub-assembly.
![]() |
Push in the box door hinge shafts by hand as far as possible.
![]() |
Using pliers, push in the box door hinge shafts completely and install the console compartment door sub-assembly.
| 12. INSTALL CONSOLE REAR END PANEL |
![]() |
Engage the 10 claws to install the console rear end panel.