Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG CUT-OFF INDICATOR LIGHT

AIRBAG CUT-OFF INDICATOR LIGHT > INSPECTION

for Preparation Click here



1. INSPECT PASSENGER SEAT BELT WARNING LIGHT ASSEMBLY


    C211108E01
  1. Apply auxiliary battery voltage to the connector and check the passenger airbag ON/OFF indicator condition.

    Result:
    Connection
    Result
    Auxiliary battery positive (+) → M2-6 (IG+)
    Auxiliary battery negative (-) → M2-1 (PAON)
    "ON" comes on
    Auxiliary battery positive (+) → M2-6 (IG+)
    Auxiliary battery negative (-) → M2-5 (P-AB)
    "OFF" comes on

    Text in Illustration 
    *1
    Component without harness connected
    (Passenger Seat Belt Warning Light Assembly)
    If the result is not as specified, replace the passenger seat belt warning light assembly.