FRONT TURN SIGNAL LIGHT ASSEMBLY > INSTALLATION |
| 1. INSTALL NO. 3 FRONT TURN SIGNAL LIGHT BRACKET (w/o Daytime Running Light) |
Engage the 3 guides to temporarily install the No. 3 front turn signal light bracket.
Install the No. 3 front turn signal light bracket with the 2 screws.
| 2. INSTALL NO. 3 FRONT TURN SIGNAL LIGHT BRACKET (w/ Daytime Running Light) |
Engage the 3 guides to temporarily install the No. 3 front turn signal light bracket.
Install the No. 3 front turn signal light bracket with the 2 screws.
Engage the 2 clamps and connect the wire harness.
| 3. INSTALL NO. 2 FRONT TURN SIGNAL LIGHT BRACKET |
![]() |
Engage the guide and claw to temporarily install the No. 2 front turn signal light bracket.
| *A | w/o Daytime Running Light |
| *B | w/ Daytime Running Light |
Install the No. 2 front turn signal light bracket with the screw.
| 4. INSTALL NO. 1 FRONT TURN SIGNAL LIGHT BRACKET |
![]() |
Engage the guide and claw to temporarily install the No. 1 front turn signal light bracket.
| *A | w/o Daytime Running Light |
| *B | w/ Daytime Running Light |
Install the No. 1 front turn signal light bracket with the screw.
| 5. INSTALL FRONT TURN SIGNAL LIGHT BULB (w/o Daytime Running Light) |
Install the front turn signal light bulb to the front turn signal light plug assembly.
![]() |
Turn the front turn signal light plug assembly with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration to install them as a unit.
| 6. INSTALL FRONT TURN SIGNAL LIGHT BULB (w/ Daytime Running Light) |
Install the front turn signal light bulb to the socket.
![]() |
Turn the socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.
| 7. INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY (w/o Daytime Running Light) |
![]() |
Engage the 2 claws to temporarily install the front turn signal light assembly.
Install the front turn signal light assembly with the clip.
Engage each clamp.
Connect the connector.
| 8. INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY (w/ Daytime Running Light) |
![]() |
Engage the 2 claws to temporarily install the front turn signal light assembly.
Install the front turn signal light assembly with the clip.
Engage each clamp.
Connect the connector.
| 9. INSTALL FRONT BUMPER ASSEMBLY |