Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER

COMBINATION METER > REMOVAL

for Preparation Click here



1. REMOVE UPPER INSTRUMENT PANEL ASSEMBLY
  1. Remove the upper instrument panel assembly (Click here).



2. REMOVE NO. 1 HEATER TO REGISTER DUCT


    B223660
  1. Remove the 3 clips and the No. 1 heater to register duct.



3. REMOVE COMBINATION METER ASSEMBLY


    E113753
  1. Disconnect the connector.

  1. Disengage the clamp.

  1. Remove the 3 screws.

  1. Disengage the clip and remove the combination meter assembly.